Related:
Back to Site Stores ({{popupVm.storeTotalCount}})
Artists ({{popupVm.artistTotalCount}})
Create your own personalised design and select from our beautiful georgette fabrics to print it onto. Ligh...
Read More
Ships in 3 - 4 days
Delivery $15.50
Handmade
Fine details and sharp lines are printed concisely, and colours are punchy and deep with this custom printed georgette material.
Browse our range of georgette fabrics
Light weight, smooth and non-stretch with a matte finish
100% Silk
Expected Shrinkage = Weft: 6% Warp: 9%
Light weight, soft and non-stretch with a matte finish
100% polyester
Care instructions
Dry clean only recommended, can be hand washed in cold water with silk detergent.
Georgette fabric is a fine woven crepe material. It is characteristically lightweight. It is a sheer textile, so the majority of garments made from georgette are lined,It has a fantastic drape, and is a fabric which fays easily. Custom printed georgette material doesn't easily crease (poly georgette barely creases at all) and is perfect for bridal wear, as well as dressmaking and home decor such as fine curtains. Georgette gets it's name from Madame Georgette de la Plante, who was a French milliner (someone who makes and/or sells women's hats) and dressmaker. Traditionally it is made from silk, however modern materials can also be used to make georgette fabric, which gives it other properties and characteristics. We offer a 100% silk, and a poly printed georgette fabric, custom made right here in our studio with your personalised design.
Silk georgette cannot be put in the washing machine, but can be dry cleaned or hand washed in cold water with silk detergent. With Silk Georgette fabric you should expect a fabric shrinkage of approximately 6% on the weft, and 10% on the warp.Once your printed georgette material has your beautiful design in full colour it can be sent straight out to you. We call this "As it comes" and you'll have a white edged border around your fabric. You can, if you prefer, choose to have your fabric either "Cut on the Line" so all the white edges are removed or as it is a fraying material, you may prefer to have it hemmed. You'll be given the option of a black or white thread, and either an overlock hem, which stitches over the edges of your fabric, or a two fold hem with a straight stitch. If you choose to have your custom printed georgette material hemmed, then please allow 6-8mm on each of the sides of your fabric (12-16 mm in total) for hemming when you give us your bespoke measurements.
All fabrics are printed digitally here in our Bags of Love studio. There are different methods that we use to do this based on whether the material is natural or synthetic. These methods include our classic method of pigment printing and reactive dye sublimation, both of which will print your personalised design in full colour to your chosen fabric. Natural materials are pigment printed, which is where the coloured dyes are applied directly to the fabric, in a localised way, building the design up. Synthetic materials use our two-step dye sublimation printing. We first print your custom design onto transfer paper, which is then bonded with heat directly to your fabric.
We print at 200dpi, which is a good combination of quality and file weight. Ideally, your image should be scaled to 100% at 200dpi; this means that no resizing of your file occurs, preventing any interpolation. Our design interface will have a quality marker next to the design that you have uploaded, this will change colour using a traffic light system and display a message. The message will let you know if the resolution is too low or if you have a good quality image.
When you upload your design our system will automatically scale it to fit your chosen fabric dimensions. In the ‘Product Options’ tab, the displayed dimensions under ‘Print Size’ will show the dimensions of the piece of fabric that you are ordering. For image/design dimensions you need to see the ‘Images & Text Tools’ tab. You can see and edit the dimensions of the image under the quality information next to the thumbnail.
We advise providing images in the RGB colour space. Specifically using the sRGB image profile, to achieve best colour results. What does this mean? In your editing software choose RGB as the working space, and assign the image profile as sRGB (full name sRGB IEC61966-2.1)
For most of our fabrics, there is no limit on the length of the fabric that you can order. We have a preview design window set up to 10m max to visualise the print, but that's not a print limit. If you'd like to order more, increase the quantity (x2 for 20m or x4 for 40m for example) and then you can order as much as you'd like, with a built-in automatic volume discount too. The maximum print width of each fabric can be found on the individual fabric pages or in our design interface.
Yes, that might help you! Always incorporate any extra space or boarders into your purchased fabric size. We trim squarely around fabric samples and fabric prints, leaving approximately 5mm white space. Cutting neatly on the line has an additional fee.
Crocking, which is fading along the creases, often after washing or heavy use, occurs when you digitally print on natural fabrics - more so when dark or dense colours are used. It can be minimised by using a cool hand wash instead of machine washing as the tumbling of the machine is the main cause of this. To avoid entirely, we would advise using a poly fabric.
Our organic fabrics do not have any coatings that the non-organic fabrics have. This means the ink absorbs into the fibres, reducing the colour strength slightly (by approx. -40%). For super strong colours we recommend a non-organic natural fabric.
Unfortunately not; we like to test meticulously so that we know what gets best results on our fabrics, and our facilities cater perfectly to them. We do however print sublimation paper to order, and if you have access to a heat press you can press your own fabrics easily.
For multi-coloured or very detailed files we recommend using a tiff format, but they must be flattened. For simple colours and low detail files, a jpeg is fine.
Just like many fabric printing processes, there is the potential for shrinkage. Depending on the fabric, please expect and allow between 2-8% shrinkage which you need to plan for in your dimensions. This percentage can vary from print run to print run and between fabrics, so we would advise ordering a little more material than you require for your project.
We do not offer to print on both sides of the fabric. A lot of our fabrics are semi-transparent or have some show through and this wouldn't work with double-sided printing. This is not a service that we offer on any of our fabrics.
At the moment no, our labels are all printed on the same satin fabric. We may introduce more in the future, but for now, this is the best choice. The labels are all cut the same way. You can order the fabric of your choice and make the labels yourself, but we do not cut different fabric into label format.
With environmental consciousness in mind, our fabrics are all printed using completely water-based inks. This means no chemicals or solvents are used. Our heat fixing procedure fixes the colours and prints, avoiding the downsides of steaming, such as excess or contaminated water returning into the waste system. We have one facility in London where we conduct all the printing, production and fulfilment. Rather than roll the fabrics, or send them in a tube, we fold them before they are sent out to you. This saves over 150 tubes a week, as well as a lot of space on the delivery van. (For delicate fabrics we ensure to package appropriately).
We work at improving our colour profiles all the time. Though rare it may happen that from one print run to another, and there could be slight colour differences, this is normal and part of the process when we are constantly improving. It is extremely unlikely that there will be a huge difference (like orange instead of red for example). Please bear in mind such colour variations can be intensified from fabric to fabric due to the varying grains and textures of the fabric; natural fabrics tend to have more muted colours than their poly alternatives. This is due to the construction of the materials as well as the print methods that have to be altered slightly for more delicate, natural textiles.
We have a full Cut & Sew service here at Bags of Love, and are able to hem your fabric prints for a small additional charge. We create a small one- or two-fold hem that typically uses 5 to 20mm of material, depending on the thickness of the fabric. So, for example, if you want a finished piece of fabric that measures 100 x 100cm, you will need to order a size of 101.5cm x 101.5cm to allow for the hem (on top of that please also allow for shrinkage of min 2%). The thicker the fabric, the bigger the hem will be. You can choose to have your prints hemmed with either Black or White thread. On our silk and other light woven fabrics, one hemmed edge will be straight (vertically down the roll) and the other will be slightly rippled. The hemming material allowances are as follows and you need to make your print bigger to accommodate the hem:
For further information about our fabrics see our FAQs.
Please note: As everything we provide is handmade to order, you may find a slight variance in the sizes.
